Recessed LED Lights: Choose and Dimmer it Right

Thinking about changing the light in your home?! Perfect! The right light can literally make a great impact on how you and your guests will see your home, which is why you need to choose it carefully. The lighting design is a real art only if you know how to choose the right one and install it in the right place and at the right angle. Even if you haven’t changed your furniture in years, recessed LED lighting, for example, can make quite of a change in the way it looks.

Well-placed recessed LED lights or also known as downlights will highlight the room’s best features, helping them stay noticed. Thus, if you want to make a change in your home without breaking the bank, recessed LED lights are the best option you have.

Recessed LED Lights

Figure Out the Needed Wattage

Before doing anything, the first thing you need to consider is the number of how much light your room needs. You can do this by multiplying the length of the room by the width in order to find the total area. Once done, multiply the area by 1.5 and the final number would be the total wattage you’ll need to light the room.

If planning to install recessed LED downlights in your kitchen, keep in mind to choose a combo of wide-angle downlights for ambient lighting and narrow-beam recessed lights for task lighting over your counters, stove, and sink.

Determine the Right Number of Fixtures

Now that you know the total number of watts you will need, divide it by the wattage of the bulb you are planning to choose, and find out the total number of recessed fixtures for the precise room. Recessed LED downlights are the most popular lighting solution recently, in fact, they are the perfect substitute to halogen globe, however, the whole wattage thing on LED’s can be a bit confusing. For example, a LED light with a wattage of 5 to 8 is equivalent to a halogen wattage of 40 to 60. This is usually marked on the packaging, so make sure you read it carefully in order not to make a mistake.

Space Them Evenly

Once you have determined the right amount of lights you need, it is time to space them evenly. Measure at least 60cm off all your walls onto the ceiling to start and make sure to divide your can lights around the room evenly. The rule of thumb says that you must leave at least 60cm between each fixture, however, you can make some changes, just make sure there is a balance.

Use a Dimming kit

When installing new recessed lighting, you have the opportunity to choose a dimming kit. Somehow, they are a must since are a flexible and practical way to help you control how much light is being used. They can also help you to save more energy and prolong the life of the bulbs which is kinda great. However, make sure every room has its own dimming switch for better illumination.